My Account
Uncategorized
Showing all 14 results
-
ACSDR50- Suits the AirPrep ADS Series
- Replacement deliquescent tablets to refill an air dryer.
- Also referred to as desiccant tablets
- Hard, white tablets can absorb up to 4 times their own weight in water!
- Comes in 23 kg bags, 40 bags per pallet
ACSDR50- Suits the AirPrep ADS Series
- Replacement deliquescent tablets to refill an air dryer.
- Also referred to as desiccant tablets
- Hard, white tablets can absorb up to 4 times their own weight in water!
- Comes in 23 kg bags, 40 bags per pallet
-
Part Number Purchase Price HTIBIX09H2O $8,572.95Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$8,572.95
-
-
Part Number Purchase Price HTIBIX25H2O $9,875.17Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$9,875.17
-
-
Graco Airless Spray Tip Seals are replacement sealing gaskets used in the spray tip and guard assembly on the RAC 5 airless spray tip series. They help maintain a tight seal at the tip interface to reduce paint bypass and drips, and they are commonly replaced during routine tip and guard maintenance.
- Replacement tip seal for the Graco RAC 5 airless spray tip series
- Installs in the tip and guard interface to support proper sealing during spraying
- Helps reduce leaks, drips, and paint bypass caused by worn or damaged seals
- Useful for routine maintenance when changing tips or servicing the guard
- Two material options depending on coating type, latex and general coatings or solvent coatings
Note: MPN 224081 (solvent coatings), MPN 243281 (latex and other coatings)
-
RotorSpray I
- Suited to coat pipes 3 inches to 5 inches
RotorSpray II
- Suited to coat pipes 5 inches to 12 inches
RotorSpray III
- Suited to coat pipes 12 inches to 35 inches
Each unit features:
- 3600 psi rated
- At least a 30:1 airless sprayer should be used, ideally a 40:1 system
- Systems are sold bare - hose and controls should be ordered separate
- Before use be sure to consult the coating manufacturer for appropriate pump and tip size. Internal Pipe Coating Tools (IPCT) are suited to a wide variety of coatings that can be applied with an airless system (a 40:1 system is suggested).Only painters experienced with applying plural component systems and the cleaning requirements of plural application equipment should use the IPCT systems with plural component paint. This is particularly true for coatings with quick set times.
-
- Full face, Airfed Painting Respirator
- Tychem QC Tyvek Hood is very simple to replace
- Bump Cap or Hard Hat options available
- Large viewing window with exceptional downward and peripheral vision, has the ability to add a light to give extra visibility
- Soft, breathable inner-bib and extra tuck-in collar
- Can use with optional ear muffs
- Choose your Air conditioner type
- Constant airflow valve - no cooling
- C40 will heat or cool the hood used with a breathing airline
- PAPR is a portable belt mounted powered air unit
- Genuine Parts - Manufactured by RPB Safety
-
- Exceptional spray finish quality
- Lightweight and robust gun
- Ergonomic design for operator comfort and control
- Air inlet swivel for ease of movement
- Unique replaceable PEEK or stainless steel needle tip reduces maintenance costs
- Superbly engineered with few parts – simple to disassemble for cleaning and service
- Convertible between airspray and compliant (HVLP models also available)
- Available in pressure feed, siphon feed or gravity feed setups with or without cups
-
BASLPL35EPPelican 9435 Hazardous Location Approved Remote Area Lighting SystemBASLPL35EPPelican 9435 Hazardous Location Approved Remote Area Lighting System
Part Number Purchase Price BASLPL35EP $3,982.00 Pelican 9435 Hazardous Location Approved Remote Area Lighting System
Part #BASLPL35EP
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$3,982.00
-
-
The Testex tape process of measuring surface profile has been used for over 50 years. It is a simple, reliable, and repeatable way of determining surface profile parameters. DeFelsko acquired the Testex tape line and incorporated it into their range of instruments, for increased compatibility and greater convenience for inspectors. DeFelsko is now offering updated packaging in 50-piece packs while continuing to offer the legacy roll packaging. NOTE - the profile ranges are not entirely the same between them - their respective ranges are shown under the Product Description tab. Tape options include the following:
- Conventional Testex Press-O-Film Tape grades.
- Use with analog spring or digital micrometers or with the PosiTector RTR H probe.
- Optical Grade Testex Press-O-Film Tape Grades
- Use with PosiTector RTR 3D probe. Provides surface data files (.sdf) that allow both 2D and 3D measurements.
- Conventional Testex Press-O-Film Tape grades.
-
GM25R955 - DiscontinuedSaniSpray HP 130 Electric Airless Disinfectant Sprayer The Graco SaniSpray HP 130 is the ideal disinfectant sprayer solution that delivers maximum, 2-gun productivity on large disinfecting jobs. Uniquely built with the highest-grade materials that are compatible with disinfectants, sanitizers and deodorizers.GM25R955 - DiscontinuedSaniSpray HP 130 Electric Airless Disinfectant Sprayer The Graco SaniSpray HP 130 is the ideal disinfectant sprayer solution that delivers maximum, 2-gun productivity on large disinfecting jobs. Uniquely built with the highest-grade materials that are compatible with disinfectants, sanitizers and deodorizers.
Part Number Purchase Price GM25R955 - Discontinued $6,221.44 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$6,221.44
-
-
- Heavy duty rubber air supply hose
- High Quality, Heavy Duty
- 300psi (1380 Kpa) rated
- Ideal for Machinery, tools and air motors
- Not Rated for Breathing air
- Sold by the metre, or 20 metre fitted assembly with Minsup Fittings
-
-
INDHHDHCBRSH5BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This half-circle electrode for the PosiTest HHD is the latest innovation from DeFelsko, offering easier use on small pipes with flanges and other protrusions. MPN: HHDHCBRSH5INDHHDHCBRSH5BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more. This half-circle electrode for the PosiTest HHD is the latest innovation from DeFelsko, offering easier use on small pipes with flanges and other protrusions. MPN: HHDHCBRSH5
Part Number Purchase Price INDHHDHCBRSH5 $495.44 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$495.44
-
