My Account
All Products
Showing 571–585 of 1005 results
-
INE134CSN- Complete Chloride, Sulfate, Nitrate Test Kit
- Uses ‘standard’ Chlor*Test method for chloride ions
- Also incorporates additional test kit for measuring Sulfates and Nitrates using the same test sample
- Used in accordance with ISO8502, AS1627-4 Standards
- Measurement range:
- Chlorides: 5 ppm to 200 ppm
- Sulfates: 0 ppm to 100 ppm
- Nitrates: 0 ppm to 150 ppm
- Complete kit includes five Chloride tests, five Sulfate tests, five Nitrate tests and Photometer
- Supplied in a portable, hard cover carry-case
- Genuine Parts - Manufactured by ChlorRid
INE134CSN- Complete Chloride, Sulfate, Nitrate Test Kit
- Uses ‘standard’ Chlor*Test method for chloride ions
- Also incorporates additional test kit for measuring Sulfates and Nitrates using the same test sample
- Used in accordance with ISO8502, AS1627-4 Standards
- Measurement range:
- Chlorides: 5 ppm to 200 ppm
- Sulfates: 0 ppm to 100 ppm
- Nitrates: 0 ppm to 150 ppm
- Complete kit includes five Chloride tests, five Sulfate tests, five Nitrate tests and Photometer
- Supplied in a portable, hard cover carry-case
- Genuine Parts - Manufactured by ChlorRid
-
INF1061
- Destructive pull-off adhesion test
- Applications include paint or plasma spray on bridge decking, coatings on steel, aluminum, concrete, etc.
- Uses standard test dolly
- Used in accordance with ISO4624, AS1580-408-5 Standards
- Kit supplied with unit body, base support ring, 20 dollies, pack of Araldite adhesive, magnetic dolly clamp, dolly cutter, instructions, carry case
INF1061- Destructive pull-off adhesion test
- Applications include paint or plasma spray on bridge decking, coatings on steel, aluminum, concrete, etc.
- Uses standard test dolly
- Used in accordance with ISO4624, AS1580-408-5 Standards
- Kit supplied with unit body, base support ring, 20 dollies, pack of Araldite adhesive, magnetic dolly clamp, dolly cutter, instructions, carry case
-
- For use with Nylon Coupling Series: PCG-1; PCG-2; PCG-3;
- Material: Double-lipped rubber
- Compatibility:
- PCG-1: 3/4″ ID and Smaller Blast Hose. MPN: 08852
- PCG-2: 1″ ID Blast Hose. MPN: 21584
- PCG-3: 1-1/4″ ID and Larger Blast Hose. MPN: 08853
- Sold as a pack of 10
-
- Reversible Tip to allow easy clearing of blockages
- 4050 psi rated
- Direct replacement for RAC 5 and RAC V tips
- Blue arrow-top handle
- Longer life, liquid honed tip insert
- Factory tested
- Sold Individually
- Genuine Parts - Manufactured by Graco
-
- Robust design includes durable forged aluminum to endure harsh environments
- Easy to clean and lighter than competitor guns
- Exclusive needle design is guaranteed for life against breakage and factory set needle requires no trigger adjustments
- Stainless steel fluid tube allows direct flow to the tip via gun fluid tube
- Able to spray heavier materials including high solid coatings and mastics
-
- Twin blade head design
- Achieves proper effective mixing action with minimal air-entrainment
- Economical coated steel or Jiffy-Mix® stainless steel options
- Ring-bound blades for safe handling
- Available in multiple lengths for various applications
-
- Available in premium or economy bristle
- Premium bristle brushes supplied individually or in pack quantities
- Economy bristle brushes supplied individually or in pack quantities
-
BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy access to ordering, operational manuals, etc. These flat wire brushes are the electrodes suited for PosiTest HHD high voltage holiday detection on flat surfaces. Additional information is as follows:
- Multiple sizes available between 2 - 48" wide (51 to 1219 mm)
- Flat wire brushes do not require couplers or spring connectors like the rolling spring electrodes do. Each brush is supplied ready-to-use.
- Sold individually.
-
BlastOne stocks all accessories and supplies for the DeFelsko PosiTest® LPD pinhole detectors. This category has the replacment sponges and sponge hardware. Details as follows:
- Adaptable sponge hardware for a variety of test configurations
- 200mm and 450mm square sheet sponges for cutting custom shapes
- 180mm and 600mm wide roller wands, including initial sponges
- Replacement sponges to use in rectangular or roller holders. Note: roller sponges are 30mm wide, with 6 being used in the 180MM wand, and 19 being used in the 600mm wand.
-
INDHHDCOUPLER
- For use with the PosiTest HHD
- Attaches to the Spring Connector via thread onto rolling springs
- Manufacturer part# HHDCOUPLER
- Made in the USA
INDHHDCOUPLER- For use with the PosiTest HHD
- Attaches to the Spring Connector via thread onto rolling springs
- Manufacturer part# HHDCOUPLER
- Made in the USA
Part Number Purchase Price INDHHDCOUPLER $271.59 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$271.59
-
-
- OEM Replacement Urethane Sleeve for Thompson® Valve II
- OEM Replacement Tungsten Carbide Sleeve for Thompson® Valve II
- Tungsten Carbide Keyslot Thompson® Valve II
- Multi-Port Sleeve for Thompson® Valve II
-
- Industry Standard - Manufactured by Schmidt
- Compact, slimline design
- Light handle action - 30% easier then other handles to hold down
- Available as Electric or Pneumatic
-
DM2152ACRK
- Pneumatic Complete Retrofit kit includes:
- Triple-line coupled remote control hose
- Control hose connections for air supply
- Auto air valve and Thompson Valve II metering valve
- Pneumatic push-pull abrasive on-off switch
- Response deadman handle
DM2152ACRK- Pneumatic Complete Retrofit kit includes:
- Triple-line coupled remote control hose
- Control hose connections for air supply
- Auto air valve and Thompson Valve II metering valve
- Pneumatic push-pull abrasive on-off switch
- Response deadman handle
Part Number Purchase Price DM2152ACRK $6,633.40 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$6,633.40
-
-
DMRGN1000
- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
DMRGN1000- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
-
DM2263001
- Pneumatically operated via twinline hoses.
- Works with all twinline pneumatic remote control systems
- 1/4"(6 mm) air supply threaded connector
- 1/8" (3 mm) air return threaded connector
- Operate by pulling down the safety flap and holding the large handle down
DM2263001- Pneumatically operated via twinline hoses.
- Works with all twinline pneumatic remote control systems
- 1/4"(6 mm) air supply threaded connector
- 1/8" (3 mm) air return threaded connector
- Operate by pulling down the safety flap and holding the large handle down
