My Account
All Products
Showing 976–990 of 1014 results
-
The Breather Vent is an essential component designed to prevent dust from entering the piston/cylinder top of the Thompson Valve II Metering Valve. Available in 1/8'' NPT or 1/4" NPT, this bronze silencer, brass strainer, and breather vent serves as an alternative replacement to Schmidt® 2152-000-17, or GV215200017. Sold individually, this Breather Vent ensures your system's longevity and optimal performance by maintaining a clean operating environment.- Suits Thompson® Valve II Metering Valve
- 1/8'' NPT or 1/4" NPT - Bronze Silencer / Brass Strainer / Breather Vent
- An alternative replacement to Schmidt® 2152-000-17, or GV215200017
- Used to keep dust out of the piston/cylinder top of the Thompson valve
- Sold Individually
-
- European-style remote controls
- 1-1/4" (32mm) thread inlet valve
- 3/4" (19mm) thread ported exhaust valve
- Available as an integrated inlet/exhaust assembly
- Supplied standard as separate valves for simplified installation and ease of maintenance
- Service repair kit includes seals, gaskets, etc. to service both the inlet and exhaust valve
- Optional service kit #2 also includes exhaust deflector plate and gasket
- Recommended replacement is the Combo Valve System- DM2223RK00
-
BA2497706
- " (25mm); Thread: NPT; Compatible: 3.5-20cuft Blast Pots
- Grit Suppression Valve
- Allows maximum pressure fluctuation without back flow of dust and abrasive Greatly reduces the likelihood that abrasive gets into the control valves
BA2497706- " (25mm); Thread: NPT; Compatible: 3.5-20cuft Blast Pots
- Grit Suppression Valve
- Allows maximum pressure fluctuation without back flow of dust and abrasive Greatly reduces the likelihood that abrasive gets into the control valves
-
BlastOne offers a full selection of industrial fittings. This group is the Hose Barb x Male Pipe NPTF brass fittings. Other information is as follows:
- Hose Barb x Male Pipe NPTF (first dimension is the hose ID for the hose barb)
- Use with crimp ferrules or worm-gear clamps
- Applications: Low Pressure SAE general service air, water, and hydraulic hoses
- Operating Pressure Range: 250 PSI Maximum at 72F
- Operating Temperature Range: -4C to 71F at 150 PSI Max.
-
FPSP25
- FPSP25, RB-2 Replacement 25mm Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
FPSP25- FPSP25, RB-2 Replacement 25mm Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
-
FVSC40
- Suits ASAP Shut off Deadman System and MistBlaster Pusherline
- Swing Check Valve is used to ensure that no air escapes into the control valves, back up the pusherline
- 40mm Full flow Valve to ensure minimal pressure loss
- Manufactured out of High quality brass - does not corrode.
FVSC40- Suits ASAP Shut off Deadman System and MistBlaster Pusherline
- Swing Check Valve is used to ensure that no air escapes into the control valves, back up the pusherline
- 40mm Full flow Valve to ensure minimal pressure loss
- Manufactured out of High quality brass - does not corrode.
-
WHEL999314VLP-24 MagnaValve - Shot Control Valve, 200-1000 Lbs flow rate, no sensor, 2.5" high 24 VdcWHEL999314VLP-24 MagnaValve - Shot Control Valve, 200-1000 Lbs flow rate, no sensor, 2.5" high 24 Vdc
Part Number Purchase Price WHEL999314 Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
GV2408907
- Incorporates abrasive shut-off ball valve and barrel union disconnector
- Suits 1 1/4" (32 mm) threaded valves and pots
- Requires approximately 6" (150 mm) extra clearance beneath the pot outlet
- Use thread sealant tape or compound to ensure an airtight connection
GV2408907- Incorporates abrasive shut-off ball valve and barrel union disconnector
- Suits 1 1/4" (32 mm) threaded valves and pots
- Requires approximately 6" (150 mm) extra clearance beneath the pot outlet
- Use thread sealant tape or compound to ensure an airtight connection
-
INCMEX2
- Measures up to 6.9% moisture content in concrete.
- Non-destructive CM Carbide Method moisture content equivalent readings.
- Large clear backlit digital display.
- Hold function “freezes” meter reading when inspecting areas where the meter face is not visible, and for easy recording of data.
- Multi-language options.
- 7% to 40% Moisture Content measurement in Wood using Pin-type probe attachments (optional)
- Attaches to a reusable relative humidity Hygro-i2® probe for in situ and hood testing of concrete per BS 8201, 8203, 5325 and ASTM F2170 (optional)
- Ambient conditions of relative humidity, temperature, dew point and grams per kilo, all shown simultaneously on one clear display. (using optional Hygro-i2 ® probe)
INCMEX2- Measures up to 6.9% moisture content in concrete.
- Non-destructive CM Carbide Method moisture content equivalent readings.
- Large clear backlit digital display.
- Hold function “freezes” meter reading when inspecting areas where the meter face is not visible, and for easy recording of data.
- Multi-language options.
- 7% to 40% Moisture Content measurement in Wood using Pin-type probe attachments (optional)
- Attaches to a reusable relative humidity Hygro-i2® probe for in situ and hood testing of concrete per BS 8201, 8203, 5325 and ASTM F2170 (optional)
- Ambient conditions of relative humidity, temperature, dew point and grams per kilo, all shown simultaneously on one clear display. (using optional Hygro-i2 ® probe)
-
INCME4
- Non-destructive in operation
- Reproducible results
- Instant readings
- No need to probe or drill of mechanically damage the surface
- Clear, easy to read analogue dial
- Strong, robust, electrodes and body
- Battery operated
- Pocket sized
INCME4- Non-destructive in operation
- Reproducible results
- Instant readings
- No need to probe or drill of mechanically damage the surface
- Clear, easy to read analogue dial
- Strong, robust, electrodes and body
- Battery operated
- Pocket sized
-
INB115BT
- Re-usable brass gauge wet film comb
- Measurement range 25 to 3200 microns
- Sold as singles, best price in pack of 200
- Reliable & easy to use
INB115BT- Re-usable brass gauge wet film comb
- Measurement range 25 to 3200 microns
- Sold as singles, best price in pack of 200
- Reliable & easy to use
-
GV2410320
- Suits 1 1/4" (32 mm) threaded valves and pots
- Assembly includes
- 2x half nipples
- FLO-ring gasket
- Hinged stainless steel collar with toggle bolt
- Use thread sealant tape or compound to ensure an airtight connection
GV2410320- Suits 1 1/4" (32 mm) threaded valves and pots
- Assembly includes
- 2x half nipples
- FLO-ring gasket
- Hinged stainless steel collar with toggle bolt
- Use thread sealant tape or compound to ensure an airtight connection
-
Ultra Paint Spray Airless Hose delivers high pressure performance with a 3:1 safety factor, featuring swivel nut female connectors and safety spring guards.
- High-pressure airless hose, tailored for superior spray results.
- Features a 3:1 built-in safety factor, offering protection against pump runaway.
- Convenient swivel nut female connectors ensure easy fit-up, locking up rigidly when tightened.
- Enhanced safety with spring guards fitted to hose ends.
- Customizable offerings with multiple pressure ratings, sizes, and lengths available.
-
The Ultra Spray Airless Whip Hose (SKU: P-SPH06) offers enhanced flexibility and movement with its 6ft lightweight design. Fitted with safety spring guards, it's the ideal choice for airless spray gun operations.
- Safety spring guards fitted to whip hose ends
- Lightweight, flexible hose makes spray gun movement easier for the operator
- 3300 psi hose is nylon braid, others are steel braid
- 6ft length
-
Introducing the UltraFlex Twin Paint Spray Hose & Air Line Hose Sets (SKU: P-GR299). Enjoy tangle-free operations with this joint air & paint fluid hose. Rated for high pressures, available in standard lengths or made-to-order.
- Ultra flexible - easy to handle
- 200 psi air pressure rated, 85 psi fluid pressure rated
- Color coded Siamese hose
- Solvent compatible fluid hose liner
- Coupled with paint, ¼" air fittings
- Standard 25 ft (7.5 m) or 50 ft (15 m) lengths
- Hose also available in made-to-order lengths and bulk - Call us!
