My Account
All Products
Showing 631–645 of 1007 results
-
- Diesel Compressor with Polyethylene Canopy
- Undercarriage with fixed towbar, brakes, ball coupling and jockey wheel and LED road lights
- Spillage free frame & AS1210 vessel including aftercooler and water separator
- Normal effective working pressure range from 7-12 bar (100-175 psi) Flow 80-180 cfm (38-88 L/s)
-
- Diesel Compressor with steel Canopy
- Boxed unit with support mounts
- Spillage free frame & AS1210 vessel including aftercooler and water separator
-
- X-AIR and XAVS Diesel Compressors
- Silenced, single stage, oil injected screw element powered by a liquid cooled, six cylinder Caterpillar engine.
- Comes standard with AirXpert 2.0, OilXpert, new improved vessel design, Eco mode and Fleetlink telematics.
- Normal effective working pressure between 5 to 14 bar (72 - 150 psi).
- Flow between 1235 - 1136 cfm (583 - 536 L/s).
-
- CPM, CPD, CPE, CPF & CPVS range of stationary electric compressors.
- Available in fixed or variable speed models.
- Silenced, single stage, oil injected screw element powered by a 400 Volt, 50 Hz 3 phase motor.
- Normal effective working pressures range between 4 to 13 bar (58 - 188 psi).
- Flow range between 27 - 1887 cfm (13 - 890 L/s).
-
- 3/4" NPSM (20mm) 'M' thread
- 1/2" (13mm) throat entry
- Straight bore
- Tungsten carbide liner
- Aluminum jacket and thread
- Use HF GFBS-P nozzle washers (1 included)
-
BNATC360CThe 360° internal pipe blasting nozzle is ideal for use when blast cleaning small interior pipes ranging in size from 65 - 125mm in diameter.
- Wear-resistant angle type blasting nozzle
- Made from tungsten carbide
- Up to 400 hours of blast life
- Aluminum thread, 50mm for NHP nozzle holder
- Aluminum jacket
BNATC360CThe 360° internal pipe blasting nozzle is ideal for use when blast cleaning small interior pipes ranging in size from 65 - 125mm in diameter.- Wear-resistant angle type blasting nozzle
- Made from tungsten carbide
- Up to 400 hours of blast life
- Aluminum thread, 50mm for NHP nozzle holder
- Aluminum jacket
-
- Made by Devilbiss
- Conventional spray gun
- Available as suction or pressure feed designs
- Industry Standard set up is 2.2mm size
- Available in fluid setup sizes 0.055" (1.4 mm), 0.070" (1.8 mm), 0.086" (2.2 mm), 0.110" (2.8 mm)
- Optional high wear and carbide setups available for advance gun
-
- The Premium Industry Standard Air Dryer
- Uses Deliquescent tablets to absorb moisture from the blasting air
- Pneumatic Fan motor with Easy Maintenance
- Galvanized Desiccant Tank lasts 5x longer then all competition
- Select size based on the CFM of your compressor
- Come fitted with 4-claw fittings
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
- ACSD250 / ADS250, ACSD400 / ADS400, ACSD750 / ADS750, ACSD950 / ADS950, ACSD1200 / ADS1200, ACSD1600 / ADS1600
-
- The Premium Industry Standard AirDryer
- Uses Aftercooler design to cool the air for maximum moisture removal
- Pneumatic Fan motor
- Easy Maintenance
- Size based on the size of your compressor
-
- Inlet size 2" (50 mm) female thread
- Outlet sizes: 2" (50 mm) female thread - 1" (25 mm) female thread - plugged (top outlet)
- Rated for up to 800 cfm airflow volume at 150 PSI
- Connected in-line close to blast machine
- Expansion flow-chamber design with internal stainless steel coalescer
- Highly effective moisture droplet removal for peak productive blasting with minimal pressure loss
- Supplied with manual drain valve
- Includes axle, wheels and handle
- Air fittings not included - specify and order separately
-
General purpose air pressure gages for monitoring of air pressure
-
General purpose air pressure regulators Ideal for regulating air pressure on airlines and pressurised equipment.
-
- 3/4" NPSM (20mm) 'M' thread
- 1/2" (13mm) throat entry
- 45° single or triple (equi-spaced) side outlets
- Tungsten carbide liner
- **Triple orifice nozzles have triple air and abrasive consumption!
-
- Ideal for blasting recesses, pipe internals, behind angles, etc.
- 2" UNC (50mm) coarse Contractor thread 'C' or 1 1/4" NPSM (32mm) Fine Industrial thread 'F'
- 3/4" (20mm) throat entry
- 45° single or triple (equi-spaced) side outlets
- Tungsten carbide liner
- **Triple orifice nozzles have triple air & abrasive consumption!
-
BABLSARF300Hazardous Area Lighting - Portable & Rechargeable Area of Classification Zone 1 and 2 (gas), Zone 21 and 22 (dust) Specifications
- Operating Temperature: Ta -20°C to +43°C
- Ingress Protection: IP66
- Temperature Classification: T4
- Battery Duration: 6 Hour (Boost), 12 Hour (Standard)
- Light Output: 1250/2000 lumens
- Light Source: 24 LEDs
- Weight: 13.8kg
- Dimensions: 370mm (w) x 260mm (d) x 400mm (h)
- Product Warranty: 5 years (exc. battery)
BABLSARF300Hazardous Area Lighting - Portable & Rechargeable Area of Classification Zone 1 and 2 (gas), Zone 21 and 22 (dust) Specifications- Operating Temperature: Ta -20°C to +43°C
- Ingress Protection: IP66
- Temperature Classification: T4
- Battery Duration: 6 Hour (Boost), 12 Hour (Standard)
- Light Output: 1250/2000 lumens
- Light Source: 24 LEDs
- Weight: 13.8kg
- Dimensions: 370mm (w) x 260mm (d) x 400mm (h)
- Product Warranty: 5 years (exc. battery)
Part Number Purchase Price BABLSARF300 $5,127.49 ATEX Zone 1 Rated, LED Compact Floodlight - 2000 Lumens - Rechargeable
Part #BABLSARF300
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$5,127.49
-
