My Account
Inspection
Adhesion Testing
Air Leak Testing
Calibration
Coating Thickness
Concrete Moisture
Environmental Conditions
Gloss Measurements
Hardness Testing
Inspection Accessories
Inspection Kits
Oven Profile
Pinhole & Holiday Testing
Surface Contamination
Surface Profile
Verification Standards
Wall Thickness
Showing 121–135 of 147 results
-
INDHHDWAND- 1.5m insulated cable, coverts the PosiTest® HHD to a wand-type instrument
- Not for voltages >15kV
INDHHDWAND- 1.5m insulated cable, coverts the PosiTest® HHD to a wand-type instrument
- Not for voltages >15kV
Part Number Purchase Price INDHHDWAND $626.57 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$626.57
-
-
Reduce the investment required to convert to PosiTest® HHD equipment by using these adaptors. Makes other brands of brush and spring electrodes compatible with DeFelsko High Voltage Holiday Detectors. (Adaptor not required for SPY electrodes)- Three adaptors available with MPN's shown, as follows:
- HHDPCWIADPT - PCWI Adaptor
- HHDTRADPT - Tinker & Rasor Adaptor
- HHD266ADPT - 266 and 280 Adaptor
- Three adaptors available with MPN's shown, as follows:
-
-
BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy access to ordering, operational manuals, etc. These flat wire brushes are the electrodes suited for PosiTest HHD high voltage holiday detection on flat surfaces. Additional information is as follows:
- Multiple sizes available between 2 - 48" wide (51 to 1219 mm)
- Flat wire brushes do not require couplers or spring connectors like the rolling spring electrodes do. Each brush is supplied ready-to-use.
- Sold individually.
-
BlastOne stocks all accessories and supplies for the DeFelsko PosiTest® LPD pinhole detectors. This category has the replacment sponges and sponge hardware. Details as follows:
- Adaptable sponge hardware for a variety of test configurations
- 200mm and 450mm square sheet sponges for cutting custom shapes
- 180mm and 600mm wide roller wands, including initial sponges
- Replacement sponges to use in rectangular or roller holders. Note: roller sponges are 30mm wide, with 6 being used in the 180MM wand, and 19 being used in the 600mm wand.
-
INDHHDCOUPLER
- For use with the PosiTest HHD
- Attaches to the Spring Connector via thread onto rolling springs
- Manufacturer part# HHDCOUPLER
- Made in the USA
INDHHDCOUPLER- For use with the PosiTest HHD
- Attaches to the Spring Connector via thread onto rolling springs
- Manufacturer part# HHDCOUPLER
- Made in the USA
Part Number Purchase Price INDHHDCOUPLER $271.59 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$271.59
-
-
APCMG20
- Gas for Calibrating CO Carbon Monoxide Monitors
- 20ppm CO Carbon Monoxide Gas
- Comes in RPB Calibration Kit for GX4, but can be used for calibrating other Brands of CO Monitors
- HAZMAT Shipping - can not ship airfreight, must go Road Freight
- Sold Individually
APCMG20- Gas for Calibrating CO Carbon Monoxide Monitors
- 20ppm CO Carbon Monoxide Gas
- Comes in RPB Calibration Kit for GX4, but can be used for calibrating other Brands of CO Monitors
- HAZMAT Shipping - can not ship airfreight, must go Road Freight
- Sold Individually
-
INDSMLINK
- Turns your cell phone or tablet into a virtual PosiTector gauge
- Accepts coating thickness, environmental and surface profile probes
- No internet connection required for mobile integration
- Kit includes holster with belt clip, wrist strap, PosiTector app, batteries
- Probes purchased separately
INDSMLINK- Turns your cell phone or tablet into a virtual PosiTector gauge
- Accepts coating thickness, environmental and surface profile probes
- No internet connection required for mobile integration
- Kit includes holster with belt clip, wrist strap, PosiTector app, batteries
- Probes purchased separately
-
INDPRBEXT
- Used to extend the reach of a DeFelsko DFT Probe
- Increases your reach up to 1.24 metres
- Collapses to only 40 cm
- Spring Adapter ensures that the probe can compress against the surface with the correct level of force.
- Probe is secured in the probe holder, which can easily articulate any direction
- Rubber grips for holding the DeFelsko® Gage
- Genuine Products - Manufactured by DeFelsko®
INDPRBEXT- Used to extend the reach of a DeFelsko DFT Probe
- Increases your reach up to 1.24 metres
- Collapses to only 40 cm
- Spring Adapter ensures that the probe can compress against the surface with the correct level of force.
- Probe is secured in the probe holder, which can easily articulate any direction
- Rubber grips for holding the DeFelsko® Gage
- Genuine Products - Manufactured by DeFelsko®
-
INDSPGS
- Probe only
- Suits standard and advanced PosiTector® SPG gauge body
- For measuring surface profile for blasted steel, textured coatings and concrete
- For use in extended reach measuring
- Surface profile gauges utilize a digital depth micrometer to measure and record peak to valley surface profile heights in preparation for the application of coatings
INDSPGS- Probe only
- Suits standard and advanced PosiTector® SPG gauge body
- For measuring surface profile for blasted steel, textured coatings and concrete
- For use in extended reach measuring
- Surface profile gauges utilize a digital depth micrometer to measure and record peak to valley surface profile heights in preparation for the application of coatings
-
APCMG00
- Gas for Calibrating CO Carbon Monoxide Monitors
- 0ppm Control Zero Gas
- Comes in RPB Calibration Kit for GX4, but can be used for calibrating other Brands of CO Monitors
- HAZMAT Shipping - can not ship airfreight, must go Road Freight Shipping
- Sold Individually
APCMG00- Gas for Calibrating CO Carbon Monoxide Monitors
- 0ppm Control Zero Gas
- Comes in RPB Calibration Kit for GX4, but can be used for calibrating other Brands of CO Monitors
- HAZMAT Shipping - can not ship airfreight, must go Road Freight Shipping
- Sold Individually
-
INE1341Achieve precise surface preparation with the Chlor*Test Surface Chloride Ion Test Kit. Designed for quick and accurate measurement of chloride ions on surfaces, this kit ensures compliance with international standards and maximum salt extraction efficiency.
- Fast Testing: Results in 1.5 minutes with 98% salt extraction efficiency
- Measurement Range: Detects chloride ions from 5 ppm to 200 ppm
- Standards Compliant: Meets ISO8502-5, ISO8502-6, and AS1627-4 requirements
- Multi-Purpose: Suitable for surface and abrasive testing.
- 5 Test Packs included
INE1341Achieve precise surface preparation with the Chlor*Test Surface Chloride Ion Test Kit. Designed for quick and accurate measurement of chloride ions on surfaces, this kit ensures compliance with international standards and maximum salt extraction efficiency.- Fast Testing: Results in 1.5 minutes with 98% salt extraction efficiency
- Measurement Range: Detects chloride ions from 5 ppm to 200 ppm
- Standards Compliant: Meets ISO8502-5, ISO8502-6, and AS1627-4 requirements
- Multi-Purpose: Suitable for surface and abrasive testing.
- 5 Test Packs included
-
INE1342
- Supplied in a pack of 4 test kits
- Abrasive Chloride measurement range 1 ppm to 50 ppm
- Compact, portable, two minute field test
- Safe handling - no needles or syringes
INE1342- Supplied in a pack of 4 test kits
- Abrasive Chloride measurement range 1 ppm to 50 ppm
- Compact, portable, two minute field test
- Safe handling - no needles or syringes
-
INE134RKIT50
- Chloride, sulphate, nitrate Ion Surface contamination Analysis test kit Replacement components
- Pack: 50 Test
- Type: Box
- Shelf life: 18-24 months
INE134RKIT50- Chloride, sulphate, nitrate Ion Surface contamination Analysis test kit Replacement components
- Pack: 50 Test
- Type: Box
- Shelf life: 18-24 months
Part Number Purchase Price INE134RKIT50 $2,986.35 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$2,986.35
-
-
INDSPGTS
- Ideal measurement tool for surface profile of concrete created by blasting, scarifying, grinding, etching, etc.
- Cabled probe only
- Accuracy: ± (76 µ + 1 %) / ± (3 mils + 1%)
- Range: 0 - 6mm / 0 - 250mils
- Tip Angle: 60 degree
- Tip Radius: 500 µm (20 mils)
- Conforms to ASTM D8271
- PosiTector body sold separately
INDSPGTS- Ideal measurement tool for surface profile of concrete created by blasting, scarifying, grinding, etching, etc.
- Cabled probe only
- Accuracy: ± (76 µ + 1 %) / ± (3 mils + 1%)
- Range: 0 - 6mm / 0 - 250mils
- Tip Angle: 60 degree
- Tip Radius: 500 µm (20 mils)
- Conforms to ASTM D8271
- PosiTector body sold separately
