My Account
All Products
Showing 211–225 of 1007 results
-
- Male threads at both ends
- Carbon steel construction
- Optional stainless steel also available
- Various seal material options for fluid compatibility
- Mount on the high-pressure filter outlets for the control of individual spray lines
- Can be used as a priming-drain valve
- Premium PEEK Seals have more than double the life of Teflon
-
Blast hoses must be cut square before attaching a fitting to them. The use of hose cutters like these are recommended as using a saw or other process will not allow the fitting to seat properly, causing premature wear. Replacement blades available. Two sizes available: HFKCT100 for hoses up to 2 3/8" (60mm) OD. HFKCT150 for hoses up to 3" (75mm) OD. -
GR25D515- Suits Graco King Xtreme and Maxlife Lowers
- Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
- Kit includes Large elbow from the bottom of the pump, 2m x 2.5cm suction hose, bent pick-up tube and all the connectors to make it happen
- Sold as a kit
- Genuine Parts - Manufactured by Graco
GR25D515- Suits Graco King Xtreme and Maxlife Lowers
- Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
- Kit includes Large elbow from the bottom of the pump, 2m x 2.5cm suction hose, bent pick-up tube and all the connectors to make it happen
- Sold as a kit
- Genuine Parts - Manufactured by Graco
-
Boost your Bristle Blaster®'s efficiency with genuine MontiPower® Accelerator Bars (SKU: P-HTROTZUAB). Designed to enhance the velocity of bristle movement, these durable bars are available in carbon steel and stainless steel to suit various surface preparation tasks. Features:
- For use with Bristle Blaster tools for enhanced performance.
- Material options: Standard carbon steel or corrosion-resistant stainless steel.
- Convenient packaging: Sold in packs of 5 for cost-effectiveness and convenience.
- Genuine MontiPower part ensures optimal compatibility and durability.
- 30-day money-back guarantee with free returns.
-
Replacement adapter hub assemblies for MontiPower MBX® and Bristle Blaster® tools. Each kit includes the correct hub, fasteners, and Allen key needed for quick installation. Available for 11mm, 23mm, 43mm, and double 23mm wheel setups.
- OEM adapter hub kits for MBX and Bristle Blaster tools
- Includes hub, fasteners, and Allen wrench
- Available in 11mm, 23mm, 43mm, and double 23mm options
- Quick replacement to keep tools running on the job
-
HLBLL49510The Nova 3 L4 Replacement Light Unit is designed to take your Nova 3 to new heights of performance. Crafted with precision and built to last, this replacement light unit ensures optimal visibility during your work tasks. Whether you're working in low-light conditions or need additional illumination, the Nova 3 L4 Replacement Light Unit is the perfect solution.HLBLL49510The Nova 3 L4 Replacement Light Unit is designed to take your Nova 3 to new heights of performance. Crafted with precision and built to last, this replacement light unit ensures optimal visibility during your work tasks. Whether you're working in low-light conditions or need additional illumination, the Nova 3 L4 Replacement Light Unit is the perfect solution.
Part Number Purchase Price HLBLL49510 $488.51 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$488.51
-
-
The Nut and Tail Connector (MPN: P-FMTN) is a durable, two-piece fitting designed specifically for AHR general-purpose air hoses used in blast equipment. Constructed with a swivel nut and female NPS long shank coupling, this connector offers versatile clamping options for secure, leak-free performance in pusher line assemblies and blast pots.
- MPN: P-FMTN
- Two-piece design: Hose tail to swivel nut with female NPS thread
- Material: Made from plated steel, not plated iron, for corrosion resistance
- Clamping options: Compatible with double bolt clamp or bandit clamp
- Gasket: Extra-thick gasket minimizes dislodgment risk
- Applications: Ideal for blast pot pusher lines and general-purpose air hoses
-
Versatile Paint Scrapers in both Premium and Economy versions (SKU: P-PS). Equipped with precision steel blades, ideal for scraping, spreading, and more. Introducing our Paint Scrapers - Premium and Economy range, the all-in-one solution to your painting preparation needs.
- Perfect for scraping, spackling, spreading, and stripping tasks.
- Constructed with precision-fitted steel blades for maximum efficiency.
- Boasts shatter-proof handles ensuring durability and safety.
- Available in both Premium and Economy versions to match your needs and budget.
- Offered in multiple sizes tailored to your specific tasks.
-
The PX5 PAPR is approved for use with most of the RPB / GVS range of respirators. Refresh or expand your PX5 using the filters and cartridges available below:
- Pre-Filters. Extend the life of the main filters using these. 10 per pack.
- Spark Arrestor. Essential when using the PX5 in certain applications.
- HEPA Cartridge Filter. The workhorse High Efficiency particulate filter, provides maximum filtration (removes 99.97% of particulates down to 0.12 microns.)
- Organic Vapor and Acid Gas Cartridge Filter. (HE/OV/AG.) Label Color Code Yellow/Magenta. The painters favorite. Approved for the following gases:
- Solvents
- Chlorine and Chlorine Dioxide
- Hydrogen Chloride and Hydrogen Fluoride
- Sulphur Dioxide
- Organic Vapors
- Multi-Gas / HE Cartridge Filter. Label Color Code Olive/Magenta. Approved for all the same gases as the OV/AG filter plus the following:
- Ammonia
- Formaldehyde
- Hydrogen Sulfide
- Methylamine
-
The GVS / RPB Z-Link is the most versatile respirator, and the cape selection offers a version for almost any application, with Fire Resistant, Aluminized, and Tychem options. Below are the various versions that are available.
- Zytec FR Face Seal (mpn 16-711)
- Tychem 2000 Face Seal (mpn 16-712)
- Zytec FR Shoulder Cape (mpn 16-721)
- Tychem 4000 Shoulder Cape (mpn 16-723)
- Aluminized Shoulder Cape (mpn 16-724)
- Zytec FR Chin Seal (mpn 16-731)
-
GV2410321L
- Extended-length version of replacement half-nipple for Tri-Clover
- Recommend replacing the O-ring when replacing these nipples - see part GV2410323
- Note: This extended-length version is recommended when the tri-clover is used by itself (without the union-end ball valve)
GV2410321L- Extended-length version of replacement half-nipple for Tri-Clover
- Recommend replacing the O-ring when replacing these nipples - see part GV2410323
- Note: This extended-length version is recommended when the tri-clover is used by itself (without the union-end ball valve)
Part Number Purchase Price GV2410321L $152.93 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$152.93
-
-
GV2410321
- Standard-length replacement Half-Nipple for Tri-Clover
- Part of main Tri-Clover Assembly (GV2410320 or GV2410320SP) - 2 nipples are required for this assembly
- Recommend replacing the O-ring when replacing these nipples - see part GV2410323
- Longer version also available - see part GV2410321L - NOTE - The longer version is recommended when using the Tri-clover without the Union-End ball valve.
GV2410321- Standard-length replacement Half-Nipple for Tri-Clover
- Part of main Tri-Clover Assembly (GV2410320 or GV2410320SP) - 2 nipples are required for this assembly
- Recommend replacing the O-ring when replacing these nipples - see part GV2410323
- Longer version also available - see part GV2410321L - NOTE - The longer version is recommended when using the Tri-clover without the Union-End ball valve.
-
When your RPB coating respirators need refreshed, we have the parts you need. This group includes the replacement Tyvek® capes/hoods.
- For both T-Link and T200 versions:
- Tychem® 2000 Full-Length Hood, MPN 17-712
- Tychem® 4000 Full-Length Hood w/sealed seams, MPN 17-713
- Tychem® 4000 Extra-Long Hood w/sealed seams, double-bib, and waist straps. MPN 17-713-SX
- For T200 version only:
- Tychem® 2000 Face Seal, MPN 17-722
- Tychem® 2000 Face Seal w/Shoulder-Length hood, MPN 17-732
- For legacy T100 version only:
- Tychem® 4000 Full-Length Hood w/ sealed seams, MPN 07-150
- Tychem® 2000 is rated for light liquid splash applications and protects against over 40 chemicals. This version is most commonly used in industrial painting applications.
- Tychem® 4000 is also rated for light liquid splash applications and protects against over 100 chemicals. RPB constructs their 4000 hoods with sealed seams for even greater protection.
- For both T-Link and T200 versions:
-
HAPX504831
- Suits RPB Safety PX5 standard Air-Purifying Respirator (PAPR)
- Used between the PX5 PAPR and Helmet
- Ultra Flexible so the user isn't restricted in movement
- Sold individually
- Genuine Product - Manufactured by RPB Safety
HAPX504831- Suits RPB Safety PX5 standard Air-Purifying Respirator (PAPR)
- Used between the PX5 PAPR and Helmet
- Ultra Flexible so the user isn't restricted in movement
- Sold individually
- Genuine Product - Manufactured by RPB Safety
Part Number Purchase Price HAPX504831 $235.60 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$235.60
-
-
HAZ18533We have the accessories you need for your RPB respirators. This unit mounts inside the helmet, helps protects your operators hearing, and mitigates the concern that they may not use ear plugs.
- Excellent noise reduction
- Designed for Z-Link/T-Link systems
- Easy adjustments
- Convenient foldable design
- Sleek and stylish appearance
- Includes HAZ18535 mounting bracket
HAZ18533We have the accessories you need for your RPB respirators. This unit mounts inside the helmet, helps protects your operators hearing, and mitigates the concern that they may not use ear plugs.- Excellent noise reduction
- Designed for Z-Link/T-Link systems
- Easy adjustments
- Convenient foldable design
- Sleek and stylish appearance
- Includes HAZ18535 mounting bracket
