BlastOne mobile dust collectors are available from 6,000 cfm to 100,000 cfm. They have been designed to look good, be easy to transport, be easy to use and require low maintenance. Units are powered by diesel engines or optional electric motors.
BlastOne dust collectors have been designed for blasters. BlastOne operates a large fleet of Dust Collectors and we manufacture our own units to suit. Obviously, because we own and operate our own units we build them to last!
EASY FILTER ACCESS
Ever had to replace filters on a dust collector? It’s a tough job right? Dirty filters are heavy, dusty, dirty… some dust collectors make it even worse by making you climb on top of the dust collector to open an access door and have to vertically lift these filters onto the top of the unit. The poor mechanic!
BlastOne has a very maintenance friendly design: all filters are accessed through the side of the unit – most of them from the ground level. The filters glide easily out of the unit and new ones slide right back in.
HIGH PRESSURE FAN
Do you ever need to run long lengths of duct hose, sometimes over 100ft? It is important that the dust collector fan is engineered to be able to maintain high capacity whilst running long ducts. A high pressure fan does this. Many dust collector manufacturers over-rate their units.
LONG FILTER LIFE THANKS TO SMART INTERNAL SPACING
For ease of maintenance, filter replacement and filter life – BlastOne dust collectors have an extra 30% space between the filters than other leading brand dust collectors which means far better dust release leading to longer filter life.
SMART REVERSE PULSE
To ensure the filters are cleaned consistently, all BlastOne dust collectors utilize a compressed air, reverse pulse blast to clean the dust cake from the filter cartridges. These are operated automatically when the unit is running.
HOW DO DUST COLLECTORS WORK?
Dust laden air travels down the ductwork and enters into the dirty air inlet plenum at the rear of the dust collector. Here the heavier particles drop out of the air stream. The air is then drawn through a large bank of high efficiency filter cartridges where the dust is deposited on the outside of the filter cartridges. Filtered air passes through to the clean air plenum and passes through the fan blower to atmosphere. The cake of dust on the cartridges is dislodged continuously by an automatic reverse pulse jet.
Dust drops into the hopper of the collector and is transferred by a screw conveyor to a conveniently located dust outlet for easy transfer to a receptacle for disposal.
MOBILE DUST COLLECTOR OPTIONS
BI-POWERED ENGINE (DIESEL/ELECTRIC)
Some job sites are different to others. Contractors know that they can save a lot of money when the job-site has power available. That is why BlastOne offers a bi-powered dust collector. Run it on plant power, generator power, or use the inbuilt diesel engine – your job, your choice.
The most cost effective option for a mobile dust collector is to mount it on a skid base. The dust collector can either be moved around using a large yard forklift, or craned on and off a truck. This option is good for projects which have long durations and the unit isn’t required to move around onsite much at all. The skid has fork pockets, rigging mounts and extendable/ collapsible legs to make transportation easy.
YARD TOWABLE TRAILER
The next step up in mobility – if you have a long project duration (2+ months), the yard towable trailer gives the ultimate site portability. While it needs to be loaded on a trailer to be delivered to the site, once onsite, it can be moved easily, as required. The ultra-heavy duty wheels & axles will last you many years of hard service.
HIGHWAY TOWABLE TRAILER
The ultimate in mobility. Perfect for projects that are short in duration (under 2 months). The highway towable trailer means that the dust collection system and power/fan unit are all mounted on a highway certified trailer meaning that the unit can be moved anywhere at any time.
The base dust collector has an engine which is not enclosed. Some customers prefer to have the diesel engine enclosed within a canopy for security, and this is a simple add on module that BlastOne can provide.
ACOUSTIC ENGINE CANOPY AND FAN ATTENUATOR
For the contractors who have to do work in noise sensitive environments, BlastOne can provide a full sound attenuation enclosure around the diesel engine and fan.
ACOUSTIC LINED FILTER HOUSING AND PULSE VALVES
As a further option to shrouding the engine and fan with an acoustic canopy, if the ultimate quietness is required (you’re right in a residential neighborhood and doing work at night time), the ultimate acoustic package is to line the filter housing and pulse-valves with acoustic lining. This reduces the operating noise to below 69 dB at 50 feet.
ECO-CLEAN™ ON-DEMAND CARTRIDGE CLEANING
Upgrade the filter cartridge cleaning system to a system that only pulses when it needs to. This increases the filter life and reduces compressed air requirements. The system monitors the filter cleanliness and only pulses the filters when required.
ULTRA-WEB II FILTER CARTRIDGES
For the ultimate filter life, get your dust collector with Ultra- Web II filters. These Teflon lined filter cartridges will last up to 70% longer than the standard cartridges supplied in the base dust collector.
“I have been using BlastOne’s dust collectors on my projects every day for over 10 years and have only changed the filters out 3 times.” – BRIDGE SUPERINTENDENT, SYDNEY, AUSTRALIA