Blasting
Showing 136–150 of 936 results
-
FREE Shipping
30 Day Money-Back Guarantee | Free Returns
90 Day Manufacturer Warranty
- Versatile! No need to have separate wet and dry blast equipment. Wet blast or dry blast with a single unit
- Minimal water usage (less than 1 pint / ½ litre per minute) with proprietary Schmidt M.I.S.T.™ technology that allows precise control of the amount of water injected into the air stream while blasting
- Abrasive tank is “dry” so there is no need to drain water to refill with abrasive. This creates a significantly cleaner job site and is more efficient
- Schmidt TeraValve™ XL abrasive metering valve offers precise and repeatable control of a wide range of coarse or fine abrasives
- Wide range of blasting pressure capabilities from 10 to 150 psi
- Toggle between wet blast, dry blast, wash-down and blow-off using a single control panel
- This version has a 3.5 C.F. capacity. Other sizes are available upon request - enquire.
Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
-
GCHECKKITNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)GCHECKKITNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)
-
CHE132C
- Chlor*Rid is a liquid soluble salt remover, which includes chlorides, nitrates, and sulfates
- Typically used as part of the surface preparation process prior to application of coatings.
- Apply using a pressure washer before you blast.
- Removing them prior to blasting means they will not be blasted into your profile and decrease the risk of coating failures
- Sold in 5-gallon drums
- Genuine products - manufactured by Chlor-Rid
CHE132C- Chlor*Rid is a liquid soluble salt remover, which includes chlorides, nitrates, and sulfates
- Typically used as part of the surface preparation process prior to application of coatings.
- Apply using a pressure washer before you blast.
- Removing them prior to blasting means they will not be blasted into your profile and decrease the risk of coating failures
- Sold in 5-gallon drums
- Genuine products - manufactured by Chlor-Rid
-
-
DMECK3999
- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
DMECK3999- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
-
DCBPP12A
- Lightweight, portable, high efficiency fan
- 2000 cfm, 12" fan
DCBPP12A- Lightweight, portable, high efficiency fan
- 2000 cfm, 12" fan
-
IPC1099Common wear items for IPC1000 RotorBlast includes the following:
- 30 Leather dust seals IPC1013
- 2 Tube locking rings, IPC1011
- 1 Bearing seal, IPC1012
- 2 Double seal bearings, IPC1009
- 1 Tube casting, IPC1008
- 1 Brake with lining, IPC1007
- 1 Rotating head, IPC1002
- 4 Pipe plugs, IPC1001 (aka FPSP25)
- 2 Tungsten Carbide washers, IPC1014
- 2 Rubber lined nipples, IPC1018
IPC1099Common wear items for IPC1000 RotorBlast includes the following:- 30 Leather dust seals IPC1013
- 2 Tube locking rings, IPC1011
- 1 Bearing seal, IPC1012
- 2 Double seal bearings, IPC1009
- 1 Tube casting, IPC1008
- 1 Brake with lining, IPC1007
- 1 Rotating head, IPC1002
- 4 Pipe plugs, IPC1001 (aka FPSP25)
- 2 Tungsten Carbide washers, IPC1014
- 2 Rubber lined nipples, IPC1018
-
IPC1008
- IPC1008, RB-6 Replacement tube casting with 1 3/8" thread
- For IPC1000 RotorBlast
- NOTE - this item is also included in Spare Parts Kit, IPC1099
IPC1008- IPC1008, RB-6 Replacement tube casting with 1 3/8" thread
- For IPC1000 RotorBlast
- NOTE - this item is also included in Spare Parts Kit, IPC1099
-
HTDCG412M2
- Highest level of durability and low vibration with steel cut spiral bevel gears
- Increases user productivity
- Offers greater comfort and control with two position side handle
- Enhanced application versatility with keyless guard
- Improved gear durability with low profile jam pot
- Quick and easy wheel removal with quick change wheel release
HTDCG412M2- Highest level of durability and low vibration with steel cut spiral bevel gears
- Increases user productivity
- Offers greater comfort and control with two position side handle
- Enhanced application versatility with keyless guard
- Improved gear durability with low profile jam pot
- Quick and easy wheel removal with quick change wheel release
-
HTPGA5
- Helical bevel gear design
- 5" wheel capacity
- 0.8 HP governed motor
- Ergonomic side handle
- Keyless adjustable protective guard
- Manufacturer part #CP9121BR
HTPGA5- Helical bevel gear design
- 5" wheel capacity
- 0.8 HP governed motor
- Ergonomic side handle
- Keyless adjustable protective guard
- Manufacturer part #CP9121BR
-
HTEJC32AIndustrial Electric Needle Scaler has the following specifications:
- 115v / 300w / 2.8 amps
- Standard needles with machine are 15 pieces of 3mm x 7 inches
- Optional needles are 32 pieces of 2mm x 7 inches
- Standard needles are carbon steel. Optional non-sparking beryllium/copper or stainless steel needles are available.
- Adjustable front handle for operator convenience
- includes 6mm Allen wrench
HTEJC32AIndustrial Electric Needle Scaler has the following specifications:- 115v / 300w / 2.8 amps
- Standard needles with machine are 15 pieces of 3mm x 7 inches
- Optional needles are 32 pieces of 2mm x 7 inches
- Standard needles are carbon steel. Optional non-sparking beryllium/copper or stainless steel needles are available.
- Adjustable front handle for operator convenience
- includes 6mm Allen wrench
-
- DO NOT use for breathing air
- Industrial interchange fittings are 300 psi rated
- Brass or plated steel bodies with brass or steel valves
- Most commonly used in the USA
-
AVAILABLE FOR RENTAL OR PURCHASE
- #1 Deadman in the industry
- Larger internal ports make it faster acting, making it a safer handle
- Compact, slimline design - 30% easier then other handles to hold down
- Simple to make in-field repairs as required
- Available as Electric or Pneumatic
- Geniune Products - Manufactured by Schmidt / Axxiom Manufacturing
-
DMRGNE2000PC
- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
DMRGNE2000PC- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug